For a limo from O'Hare to Milwaukee, choose a vehicle that can seat the full party and carry all of its bags in the same layout. This guide is for passengers arriving at Chicago O'Hare International Airport and hosts arranging their onward ride to Milwaukee. A sedan, SUV or minivan label gives you a starting point. The layout that matters is the one in use on the trip, with each passenger seated and space for the bags and equipment coming along.

All-wheel-drive sedan, SUV and minivan configurations

Start with the type of layout that could accommodate your party and its luggage. These all-wheel-drive examples span three EPA size classes, with ratings for the specific model, engine, drivetrain and transmission in the Department of Energy and EPA fuel economy data.

ModelEngineDrivetrainTransmissionEPA size classCombined label fuel economyCombined tailpipe CO₂
2025 Mercedes-Benz S500 4matic3.0 LAll-Wheel DriveAutomatic 9-spdLarge Cars24 mpg364 g/mi
2025 Cadillac XT6 AWD2.0 LAll-Wheel DriveAutomatic (S9)Small Sport Utility Vehicle 4WD23 mpg386 g/mi
2025 Chrysler Pacifica AWD3.6 LAll-Wheel DriveAutomatic 9-spdMinivan - 4WD20 mpg450 g/mi

The classes help describe the kinds of vehicles you might compare, and the ratings let you compare those particular configurations on the same measures. For car service O'Hare to Milwaukee, seating and luggage fit depend on the layout of the vehicle assigned to the ride.

Luggage space with the seats in use

Compare the space left for luggage after you account for every seat your party will use. A folding seat can create more room for bags when it is available to fold. If a passenger needs that seat, you need to fit the load into the space available with the seat in its travel position.

A smaller party with bulky items can have a different problem from a larger party with light luggage. If the party has a rigid equipment case, the practical questions are whether the case will pass through the opening and whether it can sit in the luggage area once everyone is seated. A group with soft bags may be able to arrange them differently in the same space.

Some items have to come out before the rest of the luggage. On an airport ride from O'Hare to Milwaukee with multiple stops, work materials or a stroller may need to come out while other passengers and their suitcases stay in the vehicle. The order in which belongings will be unloaded can affect how much of the available space is practical to use.

If one layout leaves too little usable space, consider another layout or divide the party between vehicles. The choice depends on who needs to arrive together and which bags need to stay with those travelers. A split that accommodates the luggage still has to put each passenger and their belongings at the right destination.

Standard SUV configurations and vehicle load limits

If a standard SUV is an option, evaluate the specific configuration and how it will carry your group’s load. These two models share an EPA size class and have different engines, drivetrains and ratings.

ModelEngineDrivetrainTransmissionEPA size classCombined label fuel economyCombined tailpipe CO₂
2025 Cadillac Escalade 4WD6.2 L4-Wheel DriveAutomatic 10-spdStandard Sport Utility Vehicle 4WD16 mpg572 g/mi
2025 Lincoln Navigator 4WD3.5 LPart-time 4-Wheel DriveAutomatic (S10)Standard Sport Utility Vehicle 4WD17 mpg510 g/mi

The label figures give you a common comparison for vehicles in the same broad class. Actual fuel use depends on the vehicle and the trip conditions, while questions about seating, cargo dimensions and boarding depend on the specific vehicle’s layout.

A standard SUV may be one of the categories you consider for car service from O'Hare to Milwaukee. To judge it alongside a minivan or another option, consider the positions the group needs to use, how passengers will reach them and where bulky items can go. The same party may use the space differently depending on who needs room to board or how luggage can be positioned.

Seating capacity and combined weight on the placard

For vehicle types covered by 49 CFR § 571.110, the vehicle placard gives the designated seating capacity and the combined occupant and cargo weight limit.

Covered vehicle placard detailWhat it describes
Designated seating capacityThe vehicle’s seating capacity
Combined occupant and cargo weight limitThe weight limit for people and cargo together

Use those entries to evaluate the group’s seating needs and total load. Assess physical fit separately by looking at the bag opening and the space remaining once the group is seated.

Weight and shape can affect the booking in different ways. A compact, heavy case counts toward the combined load even when it leaves plenty of room around it. A long, lightweight case may be difficult to position with the necessary seats in use. If the group has both kinds of luggage, describing the size and weight of the unusual pieces gives a clearer picture than supplying a total bag count.

How people use the seats matters as well. A child restraint can change how the group uses adjacent seats or reaches another row. A passenger who needs a particular way to board or exit may need a seat in a particular position. The seating arrangement needs to work with those requirements and preserve the space needed for luggage, including any mobility aid the passenger is bringing.

Details to include in the vehicle request

Give the passenger count, the types of bags, the dimensions and weight of unusual items when available, and any child restraint or boarding needs. If the ride includes separate stops in Milwaukee, specify who gets out with which items. Use those details to settle the seating and luggage arrangement for the assigned vehicle so the booking reflects how the group and its belongings will travel together.